TESY DHF22CEL Usage And Storage Instructions page 3

1 Front panel
2 Air filter
3 Adjustable humidity setting and timer indication
4 Front
5 Control panel
6 Handle
7 Air outlet
8 rear
9 Water tank
10 supply cord
11 Wheels
OPTIONAL
Activated
carbon filter cloth
(Optional)
OPERATING INSTRUCTIONS
8 7 6
F Е
LED Indicators
1 POWER-LED Green Power Led
2 LF-LED Green Low-fan Led
3 HF-LED Green High-fan Led
4 SET-LED Green Set-Led
5 TIM-LED Green Time-Led
6 SW-LED Green Swing-Led
7 ION-LED Green Ion-Led
8 W.F-LED Red Water full-Led
Humidity Level & Timer 2 digit display
The indicator features functions:
•
when the unit is plugged in, it will indicate the room
humidity level.
•
when you set the humidity, it will indicate the
humidity that you have selected
•
when you program the time for the unit to turn on
and off, it will show the hours.
•
When the environment humidity is lower than 35%,
it will show "LO"
English
PU filter layer
(Optional)
5 4 3 2 1
D C B A
•
When the environment humidity is higher than
95%, it will show "HI"
Push Button Functions
A Power Push Button
B Fan Speed Push Button
C Adjustable Humidity Push Button
D Timer Push Button
E Louver settings Button
f ION Button (Optional)
OPERATING INSTRUCTIONS
1. The Power indication light will turn on in green when
the unit is plugged in,regardless of whether the unit
is operating or not.
2. Press , the button once to start operation, the
default humidity level is 60%. Press it again to stop
operation.
3. Press button as follows:
Press to set the desired fan speed. It can be adjusted
between high speed and low speed.
4. Press , Adjustable Humidity Push Button. Press
to set the desired humidity level in the room,
which can be set in the order of: 60%, 65%, 70%,
75%, 80%, 40%, 45%, 50%, 55%, 60%. When the
relative humidity in the room is lower than the
selected humidity, the operation of the unit will
stop automatically.
5. Press button can be timer setting:
Press the button to program the time when the unit
turns on and turns off. If you want to cancel the timer
programming, press the button to adjust the time at
00, and press the button ,it will be circulate from 00-
01-02......23-24.It is the programmed time to switch
the machine. The programmed time will be cancelled
when to switch compressor manually each time. The
programmed time remains unchanged if the machine
stops to wok due to water full or during defrosting.
6. Press louver settings as follows:
Press , to set the louver settings the indication light.
7. Press button:
When press button, the Ion function will be open
and the indication light.(Optional).
Usage and Storage Instructions
EN
3