Mode Setting; Unit & Sound Setting - marsden UFR103 User Manual

Mode Setting

1. Switch the scale on using the ON/OFF button.
2. Default start-up setting for the device is Body Mode. Short press the SET button once
to switch to Object Mode.
3. Press the SET button again to switch to Ambient Temperature Mode.
4. Pressing the SET button again will revert the device to Body Mode.
Note: The Body Mode is used to measure forehead temperature. Object Mode is used to measure
object temperature, and Ambient Temperature Mode is used to measure ambient temperature.
Unit & Sound Setting
1. With the device switched on, long press the SET button for three seconds to enter ℃/℉
and sound switch settings.
2. Press the MEMORY button to toggle between ℃ and ℉.
3. Press the SET button to confirm section. The device then enters the sound settings.
4. Press the SET button again to confirm and exit settings.
Note: The Body Mode is used to measure forehead temperature. Object Mode is used to measure
object temperature, and Ambient Temperature Mode is used to measure ambient temperature.
1. To change sound settings, follow points 1-3 above, and then press the MEMORY
button to toggle sounds on/off.
2. Press the SET button to exit settings.
Note: On restart, default settings will be ℃, with sounds on.
Body Mode Object Mode
Ambient
Temperature
Mode
7