marsden UFR103 User Manual page 10

Operation: As an Ambient Thermometer
1. Press the ON/OFF button.
2. Ensure the device is in Ambient Temperature Mode (see Page 7)
3. Press the ON/OFF button to take temperature. The temperature will appear on the
display, accompanied by one beep.
Memory Recall of Measurements
1. With the device switched off, press the MEMORY button to enter Read Memory
Mode.
2. The 'M' icon and the first recorded memory appears.
3. Press the MEMORY button to move through the saved measurements.
Clear Measurements Memory
1. With the device switched off, long press the MEMORY button for eight seconds.
2. The display will show 'CLr'
3. Press the ON/OFF button to confirm. 'CLr' will flash three times, accompanied by
beeps, and the memory will be cleared.
10