Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Optimising the suction force
In order to keep the suction force optimised, the filters must
be cleared regularly during use.
Emptying and cleaning the product
Removing the dust bowl and filters (fig. F & G).
Warning! The filters are re-usable and should be cleaned
regularly.
•
Press the bowl release button (2) and pull the dust bowl
(3) straight off.
•
While holding the dust bowl over a bin or sink, pull out
the filter to empty the contents of the bowl.
•
To replace the dust bowl, place it back onto the handle
until it "clicks" firmly into position.
Warning! Never use the appliance without the filters.
Optimum dust collection will only be achieved with clean
filters.
Foam insert (fig. H) (WDC units Only)
•
Place the foam insert (12) into the centre of the wet/dry
deflector (13).
Warning! Never use the appliance for wet applications
without the water deflector and foam insert fitted.
Pre-filter (fig. I) (NVC units Only)
The Filter and pre-filter can be separated to allow better
cleaning.
•
Twist the pre-filter (11) in an anti-clockwise direction and
lift from the filter (10).
Warning! Never pick up wet applications with these units.
Cleaning the dust bowls and filters
•
The dust bowls and filters can be washed in warm soapy
water.
•
Make sure that the filters and the dust bowl are dry
before re-fitting.
Replacing the filters
The filters should be replaced every 6 to 9 months and
whenever worn or damaged.
Replacement filters are available from your
BLACK+DECKER dealer:
Maintenance
Your BLACK+DECKER corded/cordless appliance/tool has
been designed to operate over a long period of time with a
minimum of maintenance. Continuous satisfactory operation
depends upon proper tool care and regular cleaning.
8
(Original instructions)
Warning! Before performing any maintenance on corded/
cordless power tools:
•
Switch off and unplug the appliance/tool.
•
Or switch off and remove the battery from the appliance/
tool if the appliance/tool has a separate battery pack.
•
Or run the battery down completely if it is integral and
then switch off.
•
Unplug the charger before cleaning it. Your charger does
not require any maintenance apart from regular cleaning.
•
Regularly clean the ventilation slots in your
appliance/tool/charger using a soft brush or dry cloth.
•
Regularly clean the motor housing using a damp cloth.
Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black+Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with other household waste. Make this product
available for separate collection.
•
Black+Decker provides a facility for recycling
Black+Decker products once they have reached the end
of their working life. This service is provided free of
charge. To take advantage of this service please return
your product to any authorised repair agent who will
collect them on our behalf.
•
You can check the location of your nearest authorised
repair agent by contacting your local Black+Decker
office at the address indicated in this manual.
Alternatively, a list of authorized Black+Decker repair
agents and full details of our after-sales service and
contact are available on the Internet at:
www.2helpU.com.
Technical data
NVC115JL-B5 (H1)
NVC115WA-B5 (H1) WDC215WA-B5 (H1)
WDC115WA-B5 (H1)
Voltage (V)
Battery
Weight (Kg)
Charger
S003BDV0500015 S003BEV0820015
Input Voltage (V
)
ac
Output Voltage (V)
Current (mA)
Approx charge time
3.6
7.2
Li-Ion
Li-Ion
0.53
0.67
100 - 240
100 - 240
4
8.25
150
150
10
10
Advertisement
Table of Contents
