Valcom V-9830 Manual

INTRODUCTION
The Valcom V-9830 Stealth Flexhorn is a one-way
self-amplified paging horn designed to provide
voice paging as well as background music. The
stylish enclosure provides an unobtrusive,
contemporary appearance. A volume control is
accessible on the front of the horn.
SPECIFICATIONS
Applications
Used with Valcom Page Controllers
Dimensions & Weight
9.3 "H x 15.0 "W x 5.0 "D

(23.6 cm x 38.1 cm x 12.7 cm)
 Weight: 7.6 lbs (3.45 kg)
Power Requirement
-24VDC, 150mA (3 Valcom Power Units)

INSTALLATION
(Refer to Figure 1)
Using a Phillips screwdriver, remove 4

screws attaching grille to enclosure base.
 Remove horn mounting bracket and horn
from enclosure base.
Mount enclosure base to wall using

appropriate hardware.
 Reattach horn and bracket to enclosure
base.
Make signal and power connections to

Flexhorn (see Connections diagram).
Test Flexhorn volume levels making

adjustments before installing grille.
 Install grille onto enclosure base.
V-9830
One-Way Stealth Flexhorn
Power and Signal Connections
Page
Out
Valcom Page
Control
NOTE: Do not connect this speaker directly
to a 25/70/100 Volt amplifier as damage to
both the amplifier and speaker may occur.
A V-1095 can be used to provide an interface
between a centrally amplified speaker line
and Valcom self-amplified horns.
TECHNICAL ASSISTANCE
Assistance is available from the factory. Call
(540) 563-2000 and press 1 for Technical
Support or visit our website at
http://www.valcom.com.
Valcom equipment is not field repairable.
Valcom, Inc. maintains service facilities in
Roanoke, VA. Should repairs be necessary,
attach a tag to the unit clearly stating company
name, address, phone number, contact person
and the nature of the problem. Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
1
Issue 3
(Tip/A) Green
One-Way
(Ring/B) Red
Amplified
(-24VDC) White
Speaker
(GND) Black
Valcom -24VDC
Power Supply
947751