Filling With Water - Honeywell DLC203AE Series User Manual

USE & OPERATION (CONTINUED)

FILLING WITH WATER

CAUTION:
Unplug the unit from the electrical socket before emptying or refilling
the water tank.
Open the Water Fill Door located on the side of the unit.
The Water Level Indicator is located at the front of the unit. Refill the
Water
water tank when water level is low.
Fill Door
Do not fill water above the "Max." water level mark to avoid water droplets collecting on the louvers.
Check the water level in the tank before running the COOL function. Make sure that the water in the
tank is above the minimum water level mark. Running the unit in COOL mode with inadequate water
may cause pump failure.
NOTE: The water capacity refers to the total volume of water that can be contained within the air
cooler water tank and water distribution system. The water capacity in the tank at the "Max." indicator
level may be lower than the actual water capacity of the air cooler.
WARNING: Do not fill water tank with dirty water or salt water. This can damage the unit and
Honeycomb media.
EN 7