USE & OPERATION (CONTINUED)
STAND BY MODE
Once the unit is plugged in, the POWER
to turn the unit on. The cooler will start automatically at Ultra Low speed.
To turn the unit off, press
button repeatedly to change the speed between Ultra Low (I) – Low (II) - Medium (III) -
High (IV). The indicator light will show the selected speed.
left to right automatically. You can manually adjust the louvers to change vertical air flow.
: While the unit is ON, press the
and the indicator light will show the selected hours on the display screen. When the set
time has been reached, the unit will automatically turn off. The TIMER function allows
you to program the unit for up to 8 hours of use.
: When the unit is OFF, in a Standby Mode, press the
duration setting is selected and the indicator light will show the selected hours on the
display screen. The PRESET function allows you to program the unit for up to 8 hours.
When the preset time has been reached, the unit will automatically turn on. The fan speed
will start at Ultra Low speed.
button to select your desired wind type: Natural
: The fan speed alternates between Ultra Low, Low, Medium & High only.
: When Sleep Mode is selected, the air cooler will operate for 8 hours and the fan speed
will gradually decrease and eventually turn OFF when the 8 hour period is completed.
Note: The Timer cannot be set to repeat automatically. It can only be set once and
needs to be reset again after it completes one cycle.
: You can select either Ultra Low, Low, Medium or High fan speeds.
indicator light will be illuminated.
is illuminated on the display screen. The louvers will begin to move
button until the desired time duration setting is selected
button until the desired time