Installing The Air Cleaner Cap - Toro Z Master G3 Setup Instruction

3
1. Lift assist pedal
2. Flange locknut (3/8 inch)
10

Installing the Air Cleaner Cap

Parts needed for this procedure:
1 Air cleaner cap
1 Hose clamp
Procedure
Note: Not all units come with a heavy duty air cleaner.
This procedure only applies to models that have a heavy
duty air cleaner.
1. Remove the plastic plug or tape covering the air
cleaner.
1 2
Figure 14
3. Carriage bolt (3/8 x 1-1/2
inches)
2. Remove the air cleaner cap from the machine.
3. Install the hose clamp onto the air cleaner cap.
g016346
4. Install the air cleaner cap onto the air cleaner and
secure it with the hose clamp.
7
Figure 15
Figure 16
Figure 17