Installing The Air Cleaner - Toro Z MASTER Z100 series Setup Instructions

Hide thumbs Also See for Z MASTER Z100 series:
Table of Contents

Advertisement

Warning
Charging the battery produces gasses that can
explode and cause serious injury.
Keep cigarettes, sparks and flames away from
the battery.
Make sure the ignition switch is off.
Ventilate when charging or using the battery
in an enclosed space.
Important: Do not run the machine with the battery
disconnected; electrical damage may occur to the
engine computer.
Important: Do not jump start an EFI machine, or you
may damage the electronic control unit.
Step
8

Installing the Air Cleaner

Cap
Parts needed for this step:
Qty.
1
Air cleaner cap
1
Hose clamp
Procedure
1. Remove the plastic
plug.
2. Remove the air cleaner cap from the machine.
Part
m–6912
8
3. Install the hose
clamp onto the air
cleaner cap.
4. Install the air
cleaner cap onto the air
cleaner and secure it
with the hose clamp.
m–6914
m–6913

Advertisement

Table of Contents
loading

Table of Contents