Checking The Tire Pressure - Toro Z Master G3 Setup Instruction

Procedure
17
18
1
Removing Parts from the Crate
No Parts Required
Procedure
Remove the tires, the seat and the Rollover Protection
System (ROPS) Kit from the shipping crate.
2

Checking the Tire Pressure

No Parts Required
Procedure
Pressure: 13 psi (90 kPa)
Note: The front caster wheel is a semi-pneumatic tire
and does not need to be checked.
Check the air pressure in the drive tires.
Description
No parts required
Operator's Manual
Engine Owner's Manual
Operator training material
Key
Figure 1
Qty.
Check the machine before delivery to
–
the customer.
1
1
Delivering the machine to the customer.
1
2
3
Raising the Machine Up and
Installing the Drive Wheels
Parts needed for this procedure:
2 Rear wheels
Procedure
1. Remove the screws holding the right angle retaining
plate to the crate.
2. Raise the back of the machine up and support it with
jack-stands.
2
Use
Figure 2
Figure 3