Replacing The Fuse; Protecting The Environment; Technical Specifications - EuroLite LED MINI D-20 Hybrid Beam Effect User Manual

Handy effect with derby, strobe and dmx
Hide thumbs Also See for LED MINI D-20 Hybrid Beam Effect:
Table of Contents

Advertisement

Available languages

Available languages

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1
Disconnect the device from power and allow it to cool.
2
Open the fuse holder of the mains connection with a fitting screwdriver.
3
Remove the old fuse from the fuse holder and replace it with a new fuse.
4
Carefully push the fuse holder back into its position before reapplying power.

PROTECTING THE ENVIRONMENT

Disposal of old equipment
When to be definitively put out of operation, take the product to your dealer or a local recycling
plant for a disposal which is not harmful to the environment. Devices marked with this symbol
must not be disposed of as household waste. Contact your retailer or local authorities for more
information. Remove any inserted batteries and dispose of them separately from the product.
You as the end user are required by law (Battery Ordinance) to return all used batteries/
rechargeable batteries. Disposing of them in the household waste is prohibited. You may return
your used batteries free of charge to collection points in your municipality and anywhere where
batteries/rechargeable batteries are sold. By disposing of used devices and batteries correctly,
you contribute to the protection of the environment.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Protection class:
Fuse:
Flash rate:
IP classification:
Power connection:
Power output:
LED:
DMX channels:
DMX input:
DMX output:
Control:
Housing color:
Width:
Height:
Depth:
Weight:
Remote control
Battery:
100-240 V AC, 50/60 Hz
30 W
I
T1A, 250V
0 - 20 Hz
IP20
Mains input IEC connector (M) mounting
version via Power supply cord with safety plug
(provided)
1 x IEC connector (F) mounting version
16 x SMD 0,5 W CW (homogenous color mix)
4 x high-power 3 W 4in1 QCL RGBW
fehlt; fehlt
1 x 3-pin XLR (M) mounting version
1 x 3-pin XLR (F) mounting version
IR remote control, Stand-alone, Sound to light
via Microphone, DMX
Black
26 cm
18,7 cm
18,7 cm
1,75 kg
1 x Button cell 3.0 V CR2025 lithium
manganese built-in
26/28
00092113, Version 1.1

Advertisement

Table of Contents
loading

This manual is also suitable for:

51918202

Table of Contents