Set System Language; Reset All The Settings; Check Software Update Information; Upgrade The Rmware (If Available) - Philips 6000 Series User Manual

Note
• If you are updating time from DAB+ or FM, the
daylight savings option has no e ect.
• If you are updating from the network, set your time
zone.

Set system language

Select [System settings] > [Language].
A language list is displayed.
Turn SELECT knob to select a system
language then press SELECT knob to
con rm.

Reset all the settings

Select [System settings]>[Factory Reset].
Turn SELECT knob to select an option,
then press SELECT knobto con rm.
• [Yes]: Reset the radio to factory
default status.
[No]: Return to the previous menu.
•

Check software update information

Select [System settings]>[Software update].
Turn SELECT knob to select an option or
sub-option, then press SELECT knob to
con rm.
[Auto-check setting]: select
•
whether to check new software
versions periodically.
• [Check now]: check new software
versions immediately
Note
• If the radio detects that new software is available, it
asks if you want to go ahead with an update. If you
agree, the new software is downloaded and
installed.
• Before software upgrade, make sure that the radio is
connected to a stable mains power connection.
Disconnecting power during a software update may
damage the product.

Know the software version

Select [System settings]>[lnfo].
•
The current software version is shown.

Adjust backlight settings

Select [System settings]>[Backlight].
Turn SELECT knob to select an option or
sub- option, then press SELECT knob to
con rm.
• [Timeout]: select a timeout period
for display backlight.
• [On level]: select a brightness
level for the backlight.
• [Dim level]: select a display
brightness level among
Medium,Low and O .
EN