Advertisement
Advertisement
Table of Contents
Related Manuals for Philips 6000 Series
Summary of Contents for Philips 6000 Series
- Page 1 Headphones 6000 Series TAH6005 User manual Register your product and get support at www.philips.com/support...
-
Page 2: Table Of Contents
Contents Important safety instructions Hearing Safety General information 2 Your Wireless TV headphones 3 What's in the box Wireless TV headphones 3 Get started Start up Connect LED indications 4 Technical data 5 Frequently asked questions... -
Page 3: Important Safety Instructions
Important General information safety To avoid damage or malfunction: instructions Caution Do not expose headphones and transmitter to Hearing Safety excessive heat. Do not drop your headphones and transmitter. Headphones and transmitter shall not be exposed to dripping , splashing water. ... -
Page 4: Your Wireless Tv Headphones
2 Your Wireless TV headphones Congratulations on your purchase, and 2 x AAA rechargeable battery welcome to Philips! To fully bene t from the support that Philips o ers, register your product at www.philips.com/support. With this Philips over-ear headphones, you can: •... -
Page 5: Wireless Tv Headphones
Overview of your wireless TV headphones LED indicator 3.5mm plug for headphones charging Power input Channel select switch Audio in (plug with TV) Power on / o Charging socket ... -
Page 6: Get Started
AAA alkaline batteries can be used to operate the headphones, but cannot be charged with this system. Note Only use Philips rechargeable shortened sleeve NiMH batteries with your headphones. Other types of rechargeable batteries cannot be charged with this system. -
Page 7: Connect
Power on the headphones • Press the power button on the head- phones. The LED will glow “GREEN” at the headphones. Charging: “Green” ashing; Charging nished: “Green” on. Adjust the input volume • For device with 3.5mm audio output (e.g. TV), turn up the volume level on head- phones will not respond if the connecting device volume level is too low. -
Page 8: Led Indications
LED indications • Select the best channel If there is interference, switch to another signal channel in transmitter. Then press Status LED on LED on the auto-tune button on the headphones headphones Transmitter to repeat tuning. Searching Green LED ashing Green LED on Connection White... -
Page 9: Technical Data
Transmission Carrier / reception frequency: 863.53-864.53 MHz Transmission power: <9 dBm Battery 2 x AAA NiMH 700 mAh rechargeable batteries Adapter Philips: YLJXC-080040 Input: 100-240 v~, 50/60 Hz Output: 8 vdc 400 mA For further product support, please visit www.philips.com/support. -
Page 10: Frequently Asked Questions
• The headphones is at a location with thick walls. Move the transmitter away from them. • Adjust the channel setting (see ‘Get started’ on page 6-7). • Adjust the volume of the audio device. For further support, visit www.philips.com/support. - Page 11 Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. This product has been manufactured by and is sold under the responsibility of MMD Hong Kong Holding Limited or one of its a liates, and MMD Hong Kong Holding Limited is the warrantor in relation to this product.