Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
20g
Advertisement
Table of Contents
Related Manuals for Pittsburgh Automotive 60234
Summary of Contents for Pittsburgh Automotive 60234
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Specifications
7. Wear ANSI-approved safety goggles and and caution are factors, which cannot be built into heavy-duty work gloves during use. this product, but must be supplied by the operator. SAVE THESE INSTRUCTIONS. Page 2 For technical questions, please call 1-888-866-5797. 60234... - Page 3 5. Replace the Oil Fill Plug and close the Release Valve by turning it clockwise. 3. Pump the Handle up and down quickly several times to purge air from the system. 60234 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Functions Support Saddle Chain Side Tilt Forward Knob Tilt Knob Handle Release Valve Page 4 For technical questions, please call 1-888-866-5797. 60234...
-
Page 5: Operation
Transmission Jack, while guiding it into place. slowly open the Release Valve to lower the Jack. 4. Secure the transmission into 8. Move the Transmission Jack clear of the vehicle. place using its hardware. 60234 For technical questions, please call 1-888-866-5797. Page 5... -
Page 6: Troubleshooting
Jack may be low on oil. Check the oil level and refill if needed. Jack may require bleeding - see instructions on page 3. Unit may have too much hydraulic oil inside, check fluid level and adjust if needed. Page 6 For technical questions, please call 1-888-866-5797. 60234... - Page 7 Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Specify UPC 193175047885 when ordering parts. 60234 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Please Read The Following Carefully
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.