To Replace The Oven Injector - Kenwood KDG606S19 Installation And Instruction Manual

To Replace the Oven Injector

The oven burner is fixed in its cradle by a single clip
that is placed on the left-hand side of the burner. Pull
the clip further left, and with your other hand, lift
the burner up holding from the thermocouple/spark
plug holder.
The injector is placed on the right side of the burner
cradle.
Remove the injector with a 7mm spanner and
replace the injector with the ones from the spare
set, with corresponding diameters suitable to the
type of gas that is going to be used, according to the
information chart (which is also supplied in
the gas conversion kit).
* All images are for indication only; please refer to your individual unit for actual item.
36
Kenwood Free Standing Double Oven Gas Cooker KDG606S19 Manual.indd 36 Kenwood Free Standing Double Oven Gas Cooker KDG606S19 Manual.indd 36
Injector
Clip
07/08/2020 14:40 07/08/2020 14:40