Adjusting The Feet; Moving The Cooker; Stability Bracket - Kenwood KDG606S19 Installation And Instruction Manual

Adjusting the Feet

Your oven stands on 4 adjustable feet. When the oven is placed where it will be used, check if the oven is
balanced. If it is not balanced, you can adjust by turning the feet clockwise if required. It is possible to raise the
appliance a maximum of 30mm by the feet. DO NOT move the appliance by dragging, it should only be moved
by lifting it up.
Using the fitted adjustable feet is MANDATORY.
For safety reasons and to ensure adequate
ventilation, the cooker chassis MUST NOT sit
directly on the floor, a plinth, or other
support surface.
Level the cooker by screwing the bottom of the feet in or out, as shown.

Moving the Cooker

• Two people must always raise the cooker, as shown, to
prevent damaging the adjustable feet.
• Do not lift the cooker by the door handles.
• DO NOT DRAG the cooker. Lift the feet clear of the floor.

Stability Bracket

The supplied stability bracket or a recognized cooker stability device MUST be fitted.
Screw
Washer
32
* All images are for indication only; please refer to your individual unit for actual item.
Kenwood Free Standing Double Oven Gas Cooker KDG606S19 Manual.indd 32 Kenwood Free Standing Double Oven Gas Cooker KDG606S19 Manual.indd 32
Plastic Foot
Stability Bracket
You can connect a stability
chain (not supplied) to the
screws shown here...
07/08/2020 14:40 07/08/2020 14:40