Table of Contents
Advertisement
BEFORE OPERATING
* This oven is preset with the INFORMATION GUIDE.
To assist you in operating your oven useful information will appear on the display.
In this manual, the display of information guide is abbreviated.
Getting Started
Step
Plug the oven into a power point.
1
Ensure the oven door is closed.
Press the STOP/CLEAR pad so that the
oven beeps.
2
Clock Setting
* To enter the present time of day 11:34 (AM or PM).
Step
Press the TIMER/CLOCK pad twice.
1
Enter the correct time of day by press-
ing the numbers in sequence.
2
Press the TIMER/CLOCK pad again.
3
This is a 12 hour clock. If you attempt to enter an incorrect clock time (Ex. 13:45) ERROR will appear in the
display. Press the STOP/CLEAR pad and re-enter the time of day (Ex. 1:45).
The clock of the oven works based on the frequency of power source. So it may gain or lose in some area where
the frequency varies. It is recommended that you should adjust the time occasionally.
If you wish to know the time of day during the cooking, auto start or timer mode, press the TIMER/CLOCK pad.
As long as your finger is pressing the TIMER/CLOCK pad, the time of day will be displayed.
Stop/Clear
Press the STOP/CLEAR pad once to:
1. Stop the oven temporarily during cooking.
2. Clear if you make a mistake during programming.
3. Clear the message on the display after cooking.
To Cancel a Programme During Cooking
Press the STOP/CLEAR pad twice.
Downloaded from:
http://www.usersmanualguide.com/
Procedure
Procedure
Pad Order
Pad Order
x 2
E – 6
Display
SHARP, MICRO-WAVE,
OVEN will be displayed
repeatedly.
A B
:
C D E F G
1 2 3 4 5 6 7 8
Only the dots will remain.
Display
E N T E R
T I M E
1 1 : 3 4
1 2 3 4 5 6 7 8
The dots (:) will flash on and
off.
1 1 : 3 4
1 2 3 4 5 6 7 8
Advertisement
Table of Contents
