Fhiaba Premium Series Installation Manual And User's Manual page 68

15.2 Wine cellar and beverage event
notifications
Pre-alarm status
When the temperature limits are exceeded but the
alarm delay time has not yet expired, the device
is in pre-alarm status for one or both of the com-
partments. The UP arrow icon appears alongside
the compartment's set-point value during 'high tem-
perature' pre-alarm status. The DOWN arrow icon
appears alongside the compartment's set-point va-
lue during 'low temperature' pre-alarm status.
Alarm detection
When a temperature alarm arises in one or both
of the compartments, the THERMOMETER icon ap-
pears, the buzzer sounds and the red LED flashes.
Press the INFO button to open the EVENTS LIST and
turn the buzzer off. Press the BACK button
exit the EVENTS LIST. If the alarm condition resol-
ves itself, the buzzer goes off automatically.
Active alarm
During a high/low temperature alarm condition, the
UP/DOWN arrow icon with flashing red LED appe-
ars alongside the compartment's set-point value
and the buzzer sounds. Press the INFO button
to open the EVENTS LIST and turn the buzzer off. If
the alarm condition resolves itself, the buzzer goes
68
Top compartment
pre-alarm
Bottom compartment
pre-alarm
to
www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162
off automatically.
Fault detection
When a fault arises, the TOOL icon appears, the
buzzer sounds and the red LED flashes. Press the
INFO button to open the EVENTS LIST and turn the
buzzer off. Press the BACK button
EVENTS LIST.
If the alarm condition resolves itself, the buzzer
goes off automatically.
Active fault
During a fault condition affecting one or both com-
partments, the TOOL icon with flashing red LED ap-
pears on the left-hand side of the display. Press the
INFO button to open the EVENTS LIST and turn the
buzzer off.
If the fault condition resolves itself, the buzzer goes
off automatically.
Rectified event notification
If a temperature or fault condition resolves itself
before the EVENTS LIST has been consulted, the
'message' icon appears on the left-hand side of the
frame.
to exit the