7. PANEL MOUNTING
7.4 Mounting panel to the door
Before beginning installation make sure
handle is installed to the panel prior to
installing panel to door.
Operate as follows:
>
Open the door and remove the gasket carefully
starting at the corner. Continue to pull gasket free
from gasket channel
[ 1
].
>
Upon removal, lay gasket down on a flat surface.
1
58
www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162
>
Remove the two vertical gasket channel trims start-
ing from the corner
[ 2
].
2