Fhiaba Premium Series Installation Manual And User's Manual page 53

6.2 Change the opening direction of the
door (Outdoor models)
The hinges of the door of the Outdoor
models are spring preloaded so never
remove the hinges from the stainless
steel door.
> Open the door
> Support the door in the open position and use a
screwdriver to remove the screws from both hinges.
> Do not remove the hinges from the door.
> Remove the little caps from the upper and lower
holes of the new position and place them in the holes
on the opposite side of the unit.
> Turn the door upside down and align the hinges with
screw #1 to re-position the door.
> Re-install screw #2 align the door and tighten all
screws securely.
> Check that the gasket is aligned with the plastic
outline of the front of the unit.
www.fhiaba.com · info@fhiaba.com · Info Line +39 0434 420162
#1#2
#1#2
EN
53