Receiving Aprs ® Beacons; Receiving Beacons - Yaesu FTM-300DR Instruction Manual

Receiving APRS

Receiving beacons

y Displaying beacons in the APRS pop-up screen
A alarm will sound when a beacon is received on the B band
frequency, and the APRS pop-up screen will be displayed.
The contents displayed in the "APRS POP-UP SCREEN"
and the "APRS STATION LIST DETAIL SCREEN" to be
explained next are basically the same.
y Displaying beacons in the APRS STATION LIST detail screen
1
Press the [F(SETUP)] key → [APRS FUNCTION] → [STN LIST]
The APRS STATION LIST screen will be displayed.
2
Rotate the DIAL knob to select the beacon whose details
you want to review.
3
Press the DIAL knob to display the details screen.
Rotate the DIAL knob to scroll the screen.
4
Press the [BACK] key.
Returns the screen to the APRS STATION LIST screen.
Tips
• When [APRS] → [2 APRS FILTER] is set to on, a received beacon matching the filter setting will be
stored and shown on the display.
• The receive audio (beacon or voice etc.) of B band when APRS is operating may be muted by setting
[APRS] → [5 APRS MUTE] in the setup menu.
• The reception of an APRS beacon is notified by a ringing sound set in [APRS] → [7 APRS RINGER]
in the setup menu. If "OFF" is selected, no audio alarm will sound upon receiving a beacon.
beacons
®
8
FT1D
15114km 10:09
Speed
Course
Alt
En Route
(
N 36 ̊ 43 . 17 �
E 139 ̊ 47 . 35 �
STATUS TEXT
[
STATION LIST ALL
1 E JA1ZRL- 9 15:36
2 E JA6YPC- 7 12:34
3 W JA1YOE-13 04:56
4 E JQ1YBF- 9 12/27
5 E JQ1YBG-14 11/18
6 E JA1ZRL- 9 11/14
04/07
0km/h
0 ̊
-m
)
]