Starting Up The Ebike System; Requirements - Bosch Kiox BUI330 Original Operating Instructions

The following settings can be changed in the <Sys settings>:
– <Brightness>
The brightness can be adjusted in steps of 10 % from 0–100 %. The val-
ues can be adjusted with the </> buttons and selected with the +/– but-
tons. When the <Automatic> option is selected, the brightness automat-
ically adjusts to the ambient light.
– <Time>
The values can be adjusted with the </> buttons and selected with the
+/– buttons.
– <Date [DD.Mon.YYYY]>
The current date can be set here.
– <Time zone>
The correct time zone can be selected here.
– <24h form (24h time format)>
This time format can be switched on or off.
– <Brgh backg. (Bright background)>
The bright background can be switched on or off.
– <Imp. units (Imperial units)>
If this option is switched on, imperial measurements are used (e.g. miles
instead of kilometres).
– <Language>
The required language for the interface can be selected here from 9 op-
tions.
– <Factory reset>
This menu item can be used to reset the on-board computer to factory
settings.

Starting up the eBike system

Requirements

The eBike system can only be activated when the following requirements are
met:
– A sufficiently charged eBike battery is inserted (see operating instruc-
tions for the battery).
– The on-board computer is properly fitted to the holder.
Bosch eBike Systems
English – 14
1 270 020 Ken | (25.08.2020)