Operation; Setting Up The Ebike System; Requirements; Switching The Ebike System On/Off - Bosch Nyon Original Operating Instructions

Table of Contents

Advertisement

Operation

Setting up the eBike system

Requirements

The eBike system can only be activated when the following requirements are
met:
– A sufficiently charged eBike battery is inserted (see battery operating in-
structions).
– The on-board computer is properly inserted in the holder.
– The battery of the on-board computer must be sufficiently charged.

Switching the eBike system on/off

The following options are available for switching on the eBike system:
– Once the on-board computer and the eBike battery are fitted, briefly
press the on/off button (3) on the on-board computer.
– With the on-board computer inserted, press the on/off button on the
eBike battery (bicycle manufacturer-specific solutions are possible when
there is no access to the battery on/off button; see the operating instruc-
tions from the bicycle manufacturer).
The drive is activated as soon as you start pedaling (except for in the push
assistance function or with the assistance level OFF). The motor output de-
pends on which assistance level is set on the on-board computer.
As soon as you stop pedaling when in normal operation, or as soon as you
have reached a speed of 20/28 mph, the eBike drive unit switches off the
assistance. The drive is automatically re-activated as soon you start pedaling
again and the speed is below 20/28 mph.
The following options are available for switching off the eBike system:
– Press the on/off button (3) of the on-board computer for at least three
seconds.
– Switch off the eBike battery using its on/off button (some bicycle manu-
facturer-specific solutions prevent access to the battery on/off button;
see the bicycle manufacturer operating instructions).
Note: This will place the Nyon (BUI350) into standby mode.
– Remove the on-board computer from its holder.
If no power is drawn from the eBike drive for about 10 minutes (e.g. because
the eBike is not moving) and no button is pressed on the on-board computer
Bosch eBike Systems
English – 22
1 270 U20 Nen | (02.10.2020)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bui350

Table of Contents