Settings - Bosch Kiox BUI330 Original Operating Instructions

Hide thumbs Also See for Kiox BUI330:
Table of Contents

Advertisement

recent synchronisation between the smartphone and Kiox.
You can access the <Settings> from the bottom section.
<Settings>
You can access the settings menu via the status page. The <Settings> can-
not be accessed or changed while riding.
You can use the – (11) and + (12) buttons to select the setting you want.
You can open the settings, as well as any additional submenus, using the se-
lect button (9). You can use the < button (10) to go back to the previous
menu from any settings menu.
You can find the following superordinate sections on the first navigation
level:
– <Registration> You can register here, if you have not yet done so via the
app or the portal. This menu item is displayed only if you have not yet
completed a registration.
– <My eBike> – Settings for your eBike
You can reset the counters (such as the number of kilometres travelled
that day or average values) to zero either automatically or manually, and
you can reset the range. You can change the wheel circumference value
that was preset by the manufacturer by ±5 %. If your eBike features
eShift, you can also configure your eShift system here. The bicycle dealer
may base the service date on the distance travelled and/or on a period of
time. The bike component page displays the serial number and hardware
and software versions for each component in addition to other key data
which is relevant for the components.
◦ <Reset> Indicates when the last reset took place. The trip distance and
average values can be reset.
◦ <Res. tr. dat. Aut. (Reset trip data automatically) [Current set-
ting]> Select from <Off>, <Once a day> or <Aft inact 4h (After 4
hours of inactivity)>
◦ <Reset range (Reset range calculation now)> The value can be reset
to the standard setting here.
◦ <eShift> The cadence and starting gear can be set here.
◦ <Wheel circum. (Wheel circumference)> The value of the wheel cir-
cumference can be adjusted or reset to the standard setting here.
◦ <Next Service: [DD. Mon. YYYY] or at [xxxxx] [km]> only appears if
a service date has been entered by the manufacturer or dealer.
Bosch eBike Systems
English – 29
1 270 020 Ken | (25.08.2020)

Advertisement

Table of Contents
loading

Table of Contents