Quantum 4000 Installation And Operation Manual page 76

1
2
Figure B-6
If . . .
Another device is
providing
terminator power
Another device is
providing
terminator power
No other device on
the SCSI bus is
providing
terminator power
No other device on
the SCSI bus is
providing
terminator power
B-6 Drive Configuration
No Term Power
Disable Active Termination
No Term Power
Enable A ctive Termination
TRM PWR/TRM ENB Jumper Position
And . . .
The 4000/7000DLT
Series is not at the
end of the SCSI bus
chain
The 4000/7000DLT
Series is at the end
of the SCSI bus
chain
The 4000/7000DLT
Series is not at the
end of the SCSI bus
chain
The 4000/7000DLT
Series is at the end
of the SCSI bus
chain
Term Power
3
Disable Active Termination
Term Power
4
Enable Active Termination
Then You Should . . .
Connect jumpers as in Figure B-6.
Connect jumpers as in Figure B-6.
Connect jumpers as in Figure B-6.
Connect jumpers as in Figure B-6.
62-0162-01