Rear Panel Controls and Connectors
Figure 2-3
Table 2-5
Control or Connector
Power Switch
AC Power Connector
SCSI Channel Connectors
SCSI ID Switch
2-8
Description
Figure 2-3 on page 2-8 shows the controls and connectors
located on the rear panel of the 7000DLT Series.
A C P o w er
P o w e r
C o n n e c to r
S w itc h
S C S I C h an n e l
C o n n ecto rs
7000DLT Series Rear Panel
Table 2-5 describes the controls and connections.
Rear Panel Controls and Connectors
Turns power to the unit on and off.
Receptacle for AC power cord.
Connections for the interface cable that connects the
unit with the host computer and/or to other devices
on the SCSI channel. The interface cable can be
attached to either connector.
The 7000DLT, a fast, wide SCSI-2 device, uses a 68-
pin high density SCSI device connector.
Used to select the SCSI ID for the DLT drive. Factory
set at 0.
3
S C S I ID
S w itch
Purpose
62-0162-01