Quantum 4000 Installation And Operation Manual page 47

Table 5-3 Operating Condition Indications
Label
2.6
6.0
10.0
20.0 (4000/7000DLT)
Compress
Density Override
All Right Indicator
Panel LEDs, or,
all Left Indicator
Panel LEDs
Left Indicator Panel LED
Color State
Yellow ON
Blinking
Yellow ON
Blinking
Yellow ON (default)
Blinking
Yellow ON (default)
Blinking
Yellow ON
OFF
Yellow ON
OFF (default)
Blinking
- Blinking
Operating Condition
Tape is recorded in 2.6
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 6.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 10.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Tape is recorded in 20.0
format.
Tape is recorded in another
density. You selected this
density for a write from BOT.
Compression mode enabled.
(Compression can be done
only in 10.0, 15.0, 20.0, and
70.0 density.)
Compression mode disabled.
You selected a density from
the front panel.
Density will be selected by
the host (automatic).
You are in density selection
mode.
A POST error has occurred.
Drive Operating Conditions 5-7