Advertisement
Quick Links
Wing span:57.4in/1460mm;
Wing area:58sq.dm;
Length:55in/1400mm;
CAUTION : this plane is not a toy!
Before use , please carefully read this manual.
●First-time builders should seek advice from people having building
experience in order to assemble the model correctly and to produce its
performance to full extent .
●Assemble this kit only in places out of children's reach!
●Take enough safety percautions prior to operating this model.
You are responsible for this model's assembly and safe operation!
●Always keep this instruction manual ready at hand for quick
reference,even after completing the assembly.
Weight:1950g;
Engine:2-Cycle 40-46;
Radio:4channels 5servos;
P1
Advertisement
Related Manuals for Turnigy Eagle-3D
Summary of Contents for Turnigy Eagle-3D
- Page 1 Wing span:57.4in/1460mm; Weight:1950g; Wing area:58sq.dm; Engine:2-Cycle 40-46; Length:55in/1400mm; Radio:4channels 5servos; CAUTION : this plane is not a toy! Before use , please carefully read this manual. ●First-time builders should seek advice from people having building experience in order to assemble the model correctly and to produce its performance to full extent .
- Page 2 MAIN WING Connect the main wing and the aileron with hings, and glue them to ensure its safty. Cut holes for the servo. Prepare two servos and extension comparatively.
- Page 3 Put the servo into the hole, and drill holes for the servo screw. Fix the tri-horn at the right position, and connect it to the servo by pushrod. Pull the servo extension out from the holes in the main wing.
- Page 4 Nylon Screw factory provided. Join the main wing to the fuselage with carbon joiner. Fixup the mian with nylon screw. TAIL WINGS Connect the aileron and the elevator by hings and glue them. Insert the small wood part, and glow it to the fuselage to fixup the stabilizer.
- Page 5 RUDDER AND TAIL WHEEL Glue the vertical fin to the fuselage. Drill hole for the tail wheel landing gear to insert into the rudder. Insert the tail wheel landing gear into the rudder and glue it.
- Page 6 Connect the vertical fin and the rudder by hings and glue them together. Fixup the tail wheel to the fuselage by four TP screws as shown. Find out and cut the hole for the rudder servo.
- Page 7 Install the rudder servo as shown. Find out and cut the hole for the elevator servo. Install the elevator servo as shown.
-
Page 8: Main Landing Gear
MAIN LANDING GEAR Fixup the wheel,wheel cover and the landing gear together. Screw the landing gear to the fuselage by 3 screws. FUEL TANK Gather the parts for the fuel tank together. - Page 9 Install the fuel tank as shown. Put the fuel tank into the right position. Finished photo for the fuel tank.
- Page 10 ENGINE & MOTOR Install the engine mount. The firewood to airscrew sould be 118mm. Find out the motor mount and install the motor then.
- Page 11 COWLING Fixup the cowling by four screws. Another metrod for Rudder servo...
- Page 12 Control throws & CG position...
Need help?
Do you have a question about the Eagle-3D and is the answer not in the manual?
Questions and answers