Accessories; Filter Rack Accessory; Suspension Kit; Filter Rack - York MV Technical Manual

ACCESSORIES

Refer to Price Manual for specific model numbers.
Electric Heaters - Models shown under Electrical Data
include sequencers and temperature limit switches and fus-
ible links for safe, efficient operation. Circuit breakers are pro-
vided where shown.
Suspension Kit - Suspension Kit Model 1BH0601 is
designed specifically for upflow application of the units con-
tained in this technical guide. For suspension of these units in
horizontal applications, it is recommended to use angle sup-
port brackets with threaded rods at locations shown in air
handler installation instructions.
NOTE: May be used with up to a 2" filter.
Required for downflow application.
May also be used in upflow application.
All dimensions are inches. They are subject to change
without notice. Certified dimensions will be provided upon
request.

FILTER RACK ACCESSORY

Filter Rack Model
Multi-Position Horizontal Only
1FR0817 1FR0717
1FR0821 1FR0721
1FR0824 1FR0724
8
1/2"
C
19-7/8"
22"
Rack Dimensions Inches
Used With
A
MV12B 17-1/2
MV16C 21
MV12D, MV20D 24-1/2
Filter Rack - One of the following external filter rack accesso-
ries: 1FR07* or 1FR08* must be used when unit is installed
for application outlined.
Combustible Floor Base - If an electric heat accessory
which is rated for greater than zero clearance to combustible
surfaces is installed in these air handlers in the downflow
operating positions on a combustible floor, one of the follow-
ing combustible floor base accessories is required: 1FB1817,
1FB1821, or 1FB1824.
D
B
A
ACCESSORY FOOTPRINT
B C D
16-3/8 15-1/2 21
19-7/8 19 21
23-3/8 22-1/2 21
255427-YTG-F-1006
1/2"
3/4"
1-1/2"
2" Max
Thick
1"
3-1/2"
Filter
7/8"
3-1/2"
1/2"
1/2"
(All four sides)
16-1/2"
20"
21"
23-1/2"
A
22"
Filter Dimensions Inches
Width Length Thickness
17-1/2 22
21 22
24-1/2 22
Unitary Products Group
1
1
1