Identification; Unit Identification - Endress+Hauser iTEMP PCP TMT 121 Operating Instructions Manual

Identification

6
2 Identification
2.1

Unit identification

2.1.1 Legend plate
Compare the legend plates on the DIN rail transmitter with the following figures:
Fig. 1: Example: DIN rail transmitter legend plate
Fig. 2: Identification for hazardous area use (example, only on FM certified units)
CE Mark, declaration of conformity
The devices are designed to meet state-of-the-art safety requirements, have been
tested, and left the factory in a condition in which they are safe to operate. The devices
comply with the applicable standards and regulations in accordance with IEC61010
"Protection Measures for Electrical Equipment for Measurement, Control, Regulation
and Laboratory Procedures" and with the EMC requirements of IEC61326.The
measuring system described in these Operating Instructions thus complies with the
statutory requirements of the EC Directives. The manufacturer confirms successful
testing of the device by affixing to it the CE mark.
UL recognized component to UL 3111-1
GL German Lloyd marine approval
GL Type Approval for temperature measurements in hazardous locations on GL
Classed Vessels, Marine and Offshore Installations.
Temperature DIN rail transmitter
4
Endress+Hauser