Duct Covers; For Side Duct Applications - York D2CE Technical Manual

036-21359-001-B-0302
CONDENSER
SECTION
GAUGE LINE
ACCESS
40-3/8"
SUPPLY
AIR
RETURN
5-1/2"
AIR
COMPRESSOR
ACCESS
SUPPLY AIR
ACCESS 18-5/8"
27-3/4"
5-1/8"
RETURN AIR
ACCESS
REAR
VIEW
Unitary Products Group
EVAPORATOR
SECTION
OUTDOOR
AIR
40-1/2"
1" NPT FEMALE
COND. DRAIN
CONNECTION
OUTDOOR AIR
29-5/8" (15 TON)
COMPARTMENT
39-5/8" (20 TON)
ACCESS
DUCT COVERS - Units are shipped with the bottom
duct openings covered. An accessory flange kit is available for
connecting side ducts.
DOT PLUG For bottom duct applications:
(For pressure
drop reading)
1 Remove the side panels from the supply and return
FILTER
compartments to gain access to the bottom supply and
ACCESS
return air duct covers.
2 Remove and discard the bottom duct covers. (Duct
openings are closed with sheet metal covers except
when the unit includes a power exhaust option. The
covering consists of a heavy black paper composition.)
3 Replace the side supply and return air compartment
panels.

For side duct applications;

1 Replace the side panels on the supply and return air
compartments with the accessory flange kit panels.
2 Connect ductwork to the duct flanges on the rear of
unit.
air
the
11