Before operation
3
3.3 Supplying Engine Lube Oil
1) Lube oil supply to oil pan
Remove the oil port cap from the side plate and supply
lube oil as shown in the photo below.
2) Checking the oil level
Insert the dipstick completely and check the oil level.
If the oil level is lowered, supply lube oil up to the
maximum level mark (upper mark) on the dipstick.
3) Replace the dipstick
firmly by hand.
17 |
MARINE DIESEL ENGINE 6CXM-GTE2
and tighten the oil inlet cap
Oil port
��������
Do not overfill.
Overfilling will cause oil to be sprayed out from
the breather during operation and lead to engine
problems.
>