Placement Of An Oracle Product; Selv Compliance; Power Cord Connection - Oracle MICROS Kitchen Display Controller 210 Setup Manual

Placement of an Oracle Product

SELV Compliance

Safety status of I/O connections comply with SELV requirements.

Power Cord Connection

The following caution applies only to devices with a Standby power switch:
The following caution applies only to devices with multiple power cords:
Caution: Never place an Oracle product near a radiator or heat
register. Failure to follow these guidelines can cause overheating and
affect the reliability of your Oracle product.
Caution: Oracle products are designed to work with power systems having
a grounded neutral (grounded return for DC-powered products). To reduce
the risk of electric shock, do not plug Oracle products into any other type of
power system. Contact your facilities manager or a qualified electrician if
you are not sure what type of power is supplied to your building.
Caution: Not all power cords have the same current ratings. Do not use the
power cord provided with your equipment for any other products or use.
Household extension cords do not have overload protection and are not
meant for use with computer systems. Do not use household extension
cords with your Oracle product.
Caution: The power switch of this product functions as a standby type
device only. The power cord serves as the primary disconnect device for
the system. Be sure to plug the power cord into a grounded power outlet
that is nearby the system and is readily accessible. Do not connect the
power cord when the power supply has been removed from the system
chassis.
Caution: For products with multiple power cords, all power cords must be
disconnected to completely remove power from the system.
Chapter 9
Safety Agency Compliance Statements
9-2