Boost; Recycle; Fan Off Setting; Key Lock Setting - SmartVent Lite+ User Manual

Modes

Boost

BOOST enables you to immediately override fan speed settings and boost fan speed to maximum.
- On the Home Screen, press SELECT
- In BOOST mode, the time segments will become a count down to the end of the BOOST mode.
- A quick tap of SELECT

Recycle

RECYCLE is designed for environments where extremes of temperature are common. When your system is in
VENTILATION mode and the roof cavity temperature exceeds the maximum roof cavity temperature (default =
30ºC) setting, or goes below the minimum roof cavity temperature (default = 5ºC) setting, your SmartVent system
will limit the amount of air entering your home.
RECYCLE icon will be displayed when your system is in RECYCLE mode. In Advanced Setting Menu, RECYCLE
mode can be disabled (setting 007), Recycle Speed can be adjusted (setting 008) and temperature settings can
be adjusted (settings 009 and 010). The fan will operate on Recycle Speed (default = OFF) during RECYCLE mode.

Fan OFF Setting

- On the Home Screen, press SETTINGS
- Press SELECT to save the fan OFF setting.

Key Lock Setting

When Key Lock is ON, system settings cannot be changed
- Press UP and DOWN
the system is locked.
- Press UP and DOWN
that the system is unlocked.
6
for 3 seconds and system's fan will boost to maximum speed.
on the Home Screen will exit BOOST mode.
3 seconds
and then UP
together for 3 seconds, until the KEY LOCK
together for 3 seconds, until the KEY LOCK
Tap to Exit
Display
RECYCLE
speed
, or DOWN , to toggle to OFF
icon is displayed, to confirm that
icon is not displayed, to confirm