Table of Contents
Advertisement
ELITE Series Adjustable Portable Backstop Instructions
3. Install the front pad (PBEL54):
a. Lower the unit by retracting the feet until the front wheels are
on the ground.
b. Support the front pad against the front of the base frame
such that the top is flush with the tops of the side pads. Use of
1/4" - 3/8" shim is recommended.
c. Fasten front pad to base frame using two U-Clips along the
top horizontal 2x4 and two U-Clips along the bottom
horizontal 2x4 (Figure 9-10).
4. Install the front pad (PBEL66/PBEL96):
Figure 9-9: Fasten side pads to base frame with U-Clips.
Figure 9-10: Fasten front pad with U-Clips.
- 18 of 27-
JSL-Inst039
www.jayprosports.com
Advertisement
Table of Contents
