ELITE Series Adjustable Portable Backstop Instructions
8. Remove front cover from supplied rim.
9. Fasten rim to board using the 3/8"-16 x 3¾" hex bolts (4X), 3/8" flat
washers (8X), 3/8" split washers (4X), and 3/8" flanged nuts (4X) as
shown in Figure 6-6. Ensure that rim is level, side-to-side
tightening nuts.
10. Replace rim cover.
11. Follow instructions included with rim to attach net.
Level rim front-to-back using adjusting bushing in board.
4
- 9 of 27-
JSL-Inst039
www.jayprosports.com
, before fully
4