Table of Contents
Advertisement
ELITE Series Adjustable Portable Backstop Instructions
c. You may need to rotate the stops until the setscrews are
facing outward to tighten screws.
d. Tighten setscrews as much as possible without damaging hex
socket.
8. With the stops in place, the feet can be lowered until a hard stop is
reached, which lets the user know that the feet are at the correct
setting to ensure that the rim is exactly at the height indicated on
the height adjustment mechanism.
CAUTION: Once the foot stops are set, never apply excessive force when
raising or lowering the feet. If too much resistance is encountered,
remove the front padding and verify that the foot stops have not become
undone and that there are no objects obstructing the feet.
9. Lower the backstop to the transport position by removing the quick-
release pin and pulling back on handles until backstop is fully
lowered.
a. Always stand on the same side of the unit as the ring on the
quick-release pin when pulling the pin; never reach across to
the other side of the upright to pull the pin.
10. Pin the unit in the lowered (transport) position.
11. Raise the feet until both feet are off the ground and the unit rolls
freely on all four wheels.
Figure 8-3: Tighten set screws on foot stops.
- 15 of 27-
JSL-Inst039
www.jayprosports.com
Advertisement
Table of Contents
