Arkon SM416 Manual

SM416 | Mini Adhesive Dashboard, Removable Desktop, or Screw Mount
Patent Pending
Swivel Mount
Optional
Pedestal
Dash / Console
Mounting
Screws
Foam Adhesive
Mounting Disc
Desktop Mount Installation
Step 1. Clean the desk or other smooth surface area and let dry.
Step 2. Remove the backing on one side of the gel disc and place the
sticky side down on the cleaned surface. Press the top of the
disc down fi rmly to allow the gel to stick to the surface.
Step 2. Remove the backing on the top side of the gel disc and fi rmly
press the pedestal down on the adhesive disc.
Step 3. To remove the desktop gel disc, simply peel and lift up. Clean
the disc with soap and water to revive the gel's stickyness.
Vehicle Dash or Console Mount Installation
Step 1. Find a safe location on the vehicle dash or console. Clean the
dash or console surface area thoroughly with the included
alcohol pad. Allow the area dry before applying the disc.
Safety Precautions
!
Do not install Arkon products over an air bag cover or within the air
bag deployment zone. Arkon Resources, Inc. assumes no responsi-
bility of liability for injury or death as a result of car crashes and / or
air bag deployment.
Arkon is not responsible for any damages caused to your car, your
device, or yourself due to the installation or use of this pedestal mount.
Removable
Desktop
Gel Disc
SM040-2
Universal
Phone Cradle
Package Contents:
(1) SM040-2 - Universal phone cradle
(1) GN016-SBH - Swivel mount pedestal
(1) Semi-permanent foam adhesive disc (optional)
(1) Removable desktop gel disc (optional)
(1) Set of 3 mounting screws (optional)
(1) Alcohol cleaning pad
!
Do not place mount in or near an air bag deployment
zone or where it will obstruct view of the road.
Step 2. Remove the paper backing on one side of the disc and place
the sticky side down on the cleaned surface. Press the top
of the disc down fi rmly to allow the adhesive to stick to the
surface. Allow 24 hours for the adhesive to cure to the surface
before attaching the mount.
Step 3. Remove the paper on the top side and fi rmly press the mount
down on the adhesive disc.
Optional Screw Mounting
Safety Precautions
!
Drilling into the dash or console is a permanent installation
to the vehicle. Use caution and consult a mobile install
professional to avoid drilling into the gas tank, electrical
system or other highly sensitive vehicle components.
Arkon Resources, Inc. is not responsible for any damages
caused to your car or yourself due to the install of the
pedestal mount.
The Mobile Mounting Specialists™
Consumer Hotline:
USA
(800) 841-0884
INT'L (626) 254-9005
Monday - Friday 9 am - 5 pm, PST
Continued on other side...
www.arkon.com
Arcadia, CA 91006 USA
Designed in USA | Made in China and Taiwan
© Copyright 2010 Arkon Resources, Inc.