Introduction; How To Use The Manual; General Guidelines - Recom RCM 6MB Series Installation And Safety Instructions

60/72 cell monocrystalline/polycrystalline/ silicon modules
Hide thumbs Also See for RCM 6MB Series:
Table of Contents

Advertisement

1. INTRODUCTION

Thank you for selecting RECOM Photovoltaic Modules. The RECOM Photovoltaic Modules are designed and
manufactured to the highest quality standards. With correct installation and maintenance, RECOM modules will
keep providing clean energy for many years.
How to use this manual
This manual contains information regarding the installation and safe handling of RECOM RCM- xxx-6MB
(xxx= 250-310), RCM-xxx-6PB (xxx= 240-280), RCM-xxx-6MA (xxx= 290-360), RCM-xxx-6PA (xxx= 290-340),
photovoltaic modules (hereafter referred to as "modules"), manufactured by RECOM AG, hereafter referred
to as "RECOM".
Installers must read and understand this guide prior to installation. For any questions, please contact our
Global Quality & Customer Support department for further information. Installers should follow all safety
precautions described in this guide as well as local codes when installing a module.
Before installing a solar photovoltaic system, installers should familiarize themselves with its mechanical
and electrical requirements. Keep this guide in a safe place for future reference (operation and mainte-
nance) and in case of sale or disposal of the modules.

General Guidelines

Installing solar photovoltaic systems requires specialized skills and knowledge. Installation should only be
performed by qualified persons.
Installers should assume all risks of injury that might occur during installation, including, but not limited to,
the risk of electric shock.
One single module may generate more than 30V DC when exposed to direct sunlight. Contact with a DC
voltage of 30V or more is potentially hazardous.
Do not disconnect under load.
Photovoltaic solar modules convert light energy to direct current electrical energy. They are designed for
outdoor use. Modules can be ground mounted, mounted on rooftops, vehicles or boats. The proper design
of support structures lies within responsibility of the system designers and installers.
Do not use mirrors or other magnifiers to concentrate sunlight onto the modules. Artificially concentrated
light shall not be directed on the modules.
Installation Instructions UL-1703 and IEC / Rev. 05-2018 V.5
RECOM © Copyright 2018
UL AND IEC INSTALLATION GUIDE
p. 3 of 14
www.recom-solar.com

Advertisement

Table of Contents
loading

Table of Contents