Disclaimer Of Liability; Decommissioning And Recycling - Recom RCM 6MB Series Installation And Safety Instructions

60/72 cell monocrystalline/polycrystalline/ silicon modules
Hide thumbs Also See for RCM 6MB Series:
Table of Contents

Advertisement

Photovoltaic modules produce DC electrical energy from sunlight. When illuminated, each module can have
a DC potential of over 45V and should be handled with care.
Disconnecting modules under illumination may causel electrical arcing, which may result in burns, fires, or
other injuries and damages. Modules connected in series should not be disconnected under illumination.
Always use a wire management system that keeps wires and cables out of direct contact with edgedl sur-
faces, which could cut or damage the insulation. Do not allow wires to rest on the ground or roof surface.
The module junction box should not be opened or modified in any way in the field.
Do not use mirrors, lenses or other techniques to magnify or concentrate additional light on the module.

7. DISCLAIMER OF LIABILITY

As the adherence to this manual and the conditions or methods of installation, operation, use and mainte-
nance of photovoltaic (PV) products are beyond RECOM's control, RECOM does not accept responsibility
and expressly disclaims liability for any loss, damage, or expense arising out of or in any way connected
with such installation, operation, use or maintenance.
No responsibility is assumed by RECOM for any infringement of patents or other rights of third parties,
which may result from the use of the PV product. No license is granted by implication or otherwise under
any patent or patent rights.
The information in this manual is based on RECOM's best knowledge and experience and is believed to be
reliable; but such information including product specification (without limitations) and suggestions do not
constitute a warranty, express or implied. RECOM reserves the right to change the manual, the PV product,
the specifications, or product information sheets without prior notice.
The product warranty will be voided if:
Handling and installation does not conform to RECOM's written installation instructions.
The product has been modified in a manner noth previously authorized by RECOM in writing.
The product is installed in an environment for which it was not designed.

8. DECOMMISSIONING AND RECYCLING

The dismantling of PV systems must be performed with the same care and safety precautions used during
the initial installation. The PV system can generate hazardous voltage even after the system has been dis-
connected. Follow safety regulations for working with live electrical equipment.
Please recycle modules at end of life adhering to local guidelines and regulations.
Installation Instructions UL-1703 and IEC / Rev. 05-2018 V.5
RECOM © Copyright 2018
UL AND IEC INSTALLATION GUIDE
p. 13 of 14
www.recom-solar.com

Advertisement

Table of Contents
loading

Table of Contents