Recom RCM 6MB Series Installation And Safety Instructions page 11

CASE 3
BACK VIEW
AP90 V1.5/ATI TRACKER
MOUNTING
CASE 4
BACK VIEW
Mounting Color Code: Mounting Hole Location
Fixed Clamp Mount location:
Clamp Mount allowable range:
Installation Instructions UL-1703 and IEC / Rev. 05-2018 V.5
RECOM © Copyright 2018
Maximum Maximum
Rear Load: Front Load:
2400 Pa 2400 Pa
(50 psf) (50 psf)
Maximum Maximum
Rear Load: Front Load:
2400 Pa 2400 Pa
(50 psf) (50 psf)
Module Rail Fixed Clamp Mount
A - 394 mm D - 400 mm
C - 444 mm E - 1188 mm
UL AND IEC INSTALLATION GUIDE
Structural rails running parallel to
the length of the module should
be attached within the Mounting
Range on each long side frame as
shown in the color code key.
NEXTRACKER CENTER MOUNTING
(WITH RAILS)
The NexTracker mounting structure
(with rails) is authorized for use
with PV modules. Special mount-
ing holes have been provided on
the long rail of the module frame.
Use of these mounting holes for
anything other than NexTracker is
prohibited.
Clamp Mount Range
F - 200 mm
www.recom-solar.com
p. 11 of 14