Maintenance Check List; Warranty - Idex BAND-IT S10099 Manaul

Maintenance List

Warranty

MAINTENANCE CHECK LIST

COMPONENT
CLAMP HEAD
CUTTER BLADE AND
BACKING PLATE
FILTER / LUBRICATOR
ECCENTRIC LEVER
CYLINDER
TRIPPER PLATE
AIR EXHAUST
MUFFLERS
Refer to website for warranty information:
BAND-IT-IDEX, Inc.
A Unit of IDEX Corporation
4799 Dahlia Street
Denver, CO 80216-3070 USA
P: 1-800-525-0758
F: 1-800-624-3925
CHECK
CHECK FOR LOOSE
MOUNTING SCREWS.
CHECK TO SEE IF BLADE
IS LOOSE OR HAS ANY
BROKEN OR CHIPPED
EDGES.
CHECK FOR BUILD-UP OF
DIRT, ETC. CHECK FOR
LOW, CONTAMINATED OR
DISCOLORED LUBRICANT.
CHECK FOR BUILD-UP OF
DIRT, ETC., IN TEETH.
CHECK FOR BUILD-UP OF
DIRT, CONTAMINANTS ON
PISTON ROD SEALS.
CHECK FOR BUILD-UP OF
DIRT, CONTAMINANTS,
ETC.
CHECK FOR BUILD-UP OF
DIRT, CONTAMINANTS,
ETC.
http://www.band-it-idex.com/warranty.html
www.BAND-IT-IDEX.com
Page 13 of 18
ACTION
TIGHTEN ALL SCREWS AND
FASTENERS.
TIGHTEN ALL SCREWS AND
FASTENERS. REPLACE IF
NECESSARY.
DRAIN AND CLEAN WITH SOAP
AND WATER. REFILL WITH
DTE 24 HYDRAULIC OIL.
REMOVE AND CLEAN WITH
SMALL POINTED OBJECT,
KNIFE BLADE, WIRE BRUSH.
CLEAN WITH SOAP AND WARM
WATER.
CLEAN AND APPLY TYPE G-N
LUBRICANT OR EQUIVALENT.
REMOVE AND CLEAN WITH
NON-FLAMMABLE
DEGREASER.
S10099
Classic Air Tool
FREQUENCY
DAILY
DAILY
EVERY 2000 CLAMPS
EVERY 2000 CLAMPS
6 MONTHS
6 MONTHS
6 MONTHS
Document # P09287 rev. L
© Copyright
BAND-IT-IDEX, Inc. 2006
All rights reserved