Texas Instruments ADS5XJ6XEVM User Manual
  1. Manuals
  2. Brands
  3. Texas Instruments Manuals
  4. Motherboard
  5. ADS5XJ6XEVM
  6. User manual
Texas Instruments ADS5XJ6XEVM User Manual

Texas Instruments ADS5XJ6XEVM User Manual

Evaluation module
Hide thumbs Also See for ADS5XJ6XEVM:
Table of Contents

Advertisement

Quick Links

Download this manual
This user's guide describes the characteristics, operation, and use of the ADS5XJ6X evaluation module
(EVM). This document also provides a quick start guide, evaluation procedures, a description of the
software, some alternate hardware configurations, and descriptions of the jumpers, connectors, and LEDs.
......................................................................................................................
1
2
3
4
5
.......................................................................................................................
Appendix A
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
Microsoft, Windows are registered trademarks of Microsoft Corporation.
SLAU641D - June 2015 - Revised January 2016
Submit Documentation Feedback
............................................................................................................
............................................................................................
.......................................................................................................
......................................................................................
.....................................................................................................
......................................................................................................
......................................................................................
.................................................................................................
..............................................................................................................
.......................................................................................................
.......................................................................................................
.................................................................................
.................................................................................
.......................................................................................................
................................................................................
...................................................................................
..................................................................................................
..............................................................................
.....................................................................................................
...........................................................................................................
Copyright © 2015-2016, Texas Instruments Incorporated
SLAU641D - June 2015 - Revised January 2016
ADS5XJ6X Evaluation Module
Contents
List of Figures
.........................................................
......................................................................
List of Tables
User's Guide
ADS5XJ6X Evaluation Module
2
4
11
12
14
16
3
5
6
7
8
9
12
13
14
8
9
10
11
12
13
16
16
17
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADS5XJ6XEVM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Texas Instruments ADS5XJ6XEVM

Summary of Contents for Texas Instruments ADS5XJ6XEVM

  • Page 1: Table Of Contents

    ................Jumper Descriptions and Default Settings ..................... Connector Description ......................LED Descriptions Microsoft, Windows are registered trademarks of Microsoft Corporation. SLAU641D – June 2015 – Revised January 2016 ADS5XJ6X Evaluation Module Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 2: Overview

    Overview This document is intended to serve as a user’s guide for the ADS5XJ6x EVM. The ADS5XJ6XEVM is an evaluation module (EVM) designed to evaluate the ADS58J63 and ADS54J66 high-speed, JESD204B interface ADCs. The EVM includes an onboard clocking solution (LMK04828), transformer coupled inputs, full power solution, and easy-to-use software GUI and USB interface.

  • Page 3: Evm Feature Locations

    Overview www.ti.com Required Software The following software is required to operate the ADS5XJ6XEVM and is available online. See References, Section 1.4 for links. • ADS54Jxx EVM GUI The following software is required to operate the TSW14J56EVM and is available online. See References, Section 1.4...

  • Page 4: Quick Start Guide

    2.1.1 ADS54Jxx GUI Installation The ADS54Jxx GUI is used to control the ADS5XJ6XEVM. It must be used to properly configure the devices on the EVM. 1. Download the ADS54Jxx GUI from the TI website. The...

  • Page 5: Quick Start Test Setup

    Quick Start Guide www.ti.com Hardware Setup Procedure A typical test setup using the ADS5XJ6XEVM and TSW14J56EVM is shown in Figure 2. This is the test setup that will be used for the quick start procedure. The rest of this section will describe the hardware setup steps.

  • Page 6: Ads54Jxx Gui Low Level View Tab

    2.3.1 ADS54J/58J6X GUI Configuration, Mode 0 1. Open the ADS54Jxx GUI by going to Start Menu → All Programs → Texas Instruments ADCs → ADS54Jxx GUI 2. Verify that the green USB Status indicator is lit in the top right corner of the GUI. If it is not lit, click the Reconnect USB button and check the USB Status indicator again.

  • Page 7: Hsdc Pro Gui Main Panel

    2.3.2 HSDC Pro GUI Configuration 1. Open High Speed Data Converter Pro by going to Start Menu → All Programs → Texas Instruments → High Speed Data Converter Pro. The GUI main page looks as shown in Figure Figure 4. HSDC Pro GUI Main Panel 2.

  • Page 8: Channel 1 Data Capture Results From Quick Start Procedure

    ADS54J66 GUI Configuration, Bypass Mode (For the ADS54J66EVM only) In the ADS54Jxx GUI, click on the Low Level View tab then click the Load Config button. Navigate to “C:\Program Files(86)\Texas Instruments\ADS54Jxx GUI\Configuration Files”, select the file called “LMK_Config_LMF_4841_491p52_MSPS.cfg”, then click “OK”. This will program the LMK04828 to provide a 491.52-MHz clock to the ADC.

  • Page 9: Channel 1 Data Capture Results In Bypass Mode

    Figure 6. Channel 1 Data Capture Results in Bypass Mode Table 2. Quick Start Performance Measurements Result Measured Value Units 69.04 dBFS SFDR dBFS SLAU641D – June 2015 – Revised January 2016 ADS5XJ6X Evaluation Module Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 10: Troubleshooting Tips

    Verify that band-pass filters are used in the clock and input signal paths and that low-noise signal sources are used. ADS5XJ6X Evaluation Module SLAU641D – June 2015 – Revised January 2016 Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 11: Optimizing Evaluation Results

    Configure the number of contiguous samples per capture (capture depth). May also enable Capture Options Continuous Capture and FFT Averaging. SLAU641D – June 2015 – Revised January 2016 ADS5XJ6X Evaluation Module Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 12: Software Description

    The device configurations can be saved from this tab for use in the user’s system. See Section 4.2 more information. ADS5XJ6X Evaluation Module SLAU641D – June 2015 – Revised January 2016 Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 13: Low Level View Tab

    Perform a generic read or write command to the device shown in the ‘Block’ drop-down box Buttons using the Address and Write Data information SLAU641D – June 2015 – Revised January 2016 ADS5XJ6X Evaluation Module Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 14: Alternate Hardware Configurations

    LMK04828. To accomplish this, send the 10-MHz reference output from the signal generator and connect it to J12 (CLKIN) of the ADS5XJ6XEVM. This will cause LED D6 to illuminate indicating the LMK VCXO source is locked to the external reference clock. The provided LMK configuration files will work in this mode as well.
  • Page 15 ADC sampling rate. A 10-MHz signal can be brought into the CLKIN input to synchronize to external instruments. This is the board default mode of operation. SLAU641D – June 2015 – Revised January 2016 ADS5XJ6X Evaluation Module Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 16: Jumper Descriptions And Default Settings

    TRIGAB test point (pin1) and GND (pin 2). Manual burst mode trigger input. TRIGCD test point (pin1) and GND (pin 2). Trigger ready output for burst mode. SLAU641D – June 2015 – Revised January 2016 Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...

  • Page 17: Led Descriptions

    Changed content in step 1 in Section 2.2.2. NOTE: Page numbers for previous revisions may differ from page numbers in the current version. SLAU641D – June 2015 – Revised January 2016 Revision History Submit Documentation Feedback Copyright © 2015–2016, Texas Instruments Incorporated...
  • Page 18 STANDARD TERMS AND CONDITIONS FOR EVALUATION MODULES Delivery: TI delivers TI evaluation boards, kits, or modules, including any accompanying demonstration software, components, or documentation (collectively, an “EVM” or “EVMs”) to the User (“User”) in accordance with the terms and conditions set forth herein. Acceptance of the EVM is expressly subject to the following terms and conditions.
  • Page 19 FCC Interference Statement for Class B EVM devices NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 20 【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。 1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。 2. 実験局の免許を取得後ご使用いただく。 3. 技術基準適合証明を取得後ご使用いただく。 なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル 3.3.3 Notice for EVMs for Power Line Communication: Please see http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page 電力線搬送波通信についての開発キットをお使いになる際の注意事項については、次のところをご覧くださ い。http://www.tij.co.jp/lsds/ti_ja/general/eStore/notice_02.page SPACER EVM Use Restrictions and Warnings: 4.1 EVMS ARE NOT FOR USE IN FUNCTIONAL SAFETY AND/OR SAFETY CRITICAL EVALUATIONS, INCLUDING BUT NOT LIMITED TO EVALUATIONS OF LIFE SUPPORT APPLICATIONS.
  • Page 21 Notwithstanding the foregoing, any judgment may be enforced in any United States or foreign court, and TI may seek injunctive relief in any United States or foreign court. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2015, Texas Instruments Incorporated...
  • Page 22 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue.

Table of Contents