Download Print this page

Happybeds Blake Wooden Trundle Bed Assembly Instructions Manual

Advertisement

Quick Links

DO NOT: use this bed frame unless all fixings are secured.
DO NOT: push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
DO NOT: use any power tools as this may damage the frame and will invalidate any claim.
ecommendation: Periodical re-tightening of fixings.
Warning
this bed is placed on a non-carpeted floor you must place some protection
nder all legs to stop the bed frame from moving. If this is not adhered to there is no
uarantee if the bed frame collapses.
Blake Wooden Trundle Bed
his unit is heavy. Please use an assistant when lifting.
Important before assembly:
Read these instructions carefully before assembling or using the product.
Please check the contents of the boxes before attempting to assemble this product. The instructions will
have a checklist of parts and fittings.
It would be sensible to lay a rug or a carpet on the floor where you intend to assemble the product,
to void scratches and damaging the product or the floor.
Assemble the product as close to its intended final location/room as possible.
Do NOT use any power tools as this may damage the frame.
Health & Safety:
This product or some parts of this product will be heavy. Please use an assistant when lifting.
DO NOT jump on the product or any of its parts.
DO NOT use this product if any parts are missing, damaged or worn.
DO NOT use this product unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
Please keep these instructions for future reference.
Assembly Instructions
Page 1 of 5
www.happybeds.co.uk

Advertisement

loading

Summary of Contents for Happybeds Blake Wooden Trundle Bed

  • Page 1 If this is not adhered to there is no uarantee if the bed frame collapses. Blake Wooden Trundle Bed his unit is heavy. Please use an assistant when lifting. Important before assembly: Read these instructions carefully before assembling or using the product.
  • Page 2 Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
  • Page 3: Part List

    PART LIST PART DESCRIPTION Side Rail End Panel Leg Support Rail Wood Slat Centre Metal Bar HARDWARE LIST PART DESCRIPTION M8 x 30mm Wood Dowel M6 x 60mm JCBC Bolt + Barrel Nut M6 x 70mm JCBC Bolt + Barrel Nut #4 x 30mm Screw Caster Wheels #3.5 x 16mm Screw...
  • Page 4 Step 1: Attach the Leg Support Rail (3) to the Side Rail (1). Please secure using hardware A,C and G. Step 2: Attach the another Side Rail (1) to the Leg Support Rail (3). Please secure using hardware A,C and G. Page 3 of 5...
  • Page 5 Step 3: Attach the End Panel (2) front and back to the Side Rails (1). Please secure using hardware A,B and G . Step 4: Attach the Wood Slats (4) to the trundle Side Rails (1) using hardware part (D) and fully tighten using a screwdriver (not provided) and the last attach the Caster Wheel (E) to the trundle legs using hardware part (G).
  • Page 6 floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...