Summary of Contents for Happybeds Bronte Metal Bed 4ft6
Page 1
Assembly Instructions Bronte Metal Bed 4ft6 Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Vendor: S000053 Part List Hardware List (found in box 1) Part Description Part Description Headend M6 x 16mm JCBC Screw Footend M6 x 50mm JCBC Screw Side Support M6 Nut Side Frame M6 x 35mm JCBC Screw Mid Support Double Slat Cap Base Leg Single Slat Cap Slat...
Page 4
Vendor: S000053 Step 2: Place the side frame (4) at the bottom of the side support (3) and tightly secure using hardware parts (B) and (C). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Small Allen Key ON TOP...
Page 5
Vendor: S000053 Step 5 : Push hardware part (E) into the mid support (5), then place hardware part (F) onto the end of each slat (7). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6 : Insert the slats (7) to hardware part (E) and press rmly into the side supports (3).
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...