Summary of Contents for Happybeds Solo Metal Bed 3ft
Page 1
Assembly Instructions Solo Metal Bed 3ft Important before assembly: Read these instructions carefully before assembling or using the product. Please check the contents of the boxes before attempting to assemble this product. The instructions will have a checklist of parts and fittings.
Page 2
Never drag or push the pieces across a hard or stone floor as this will cause damage to the joints. Use a carpet or a rug for extra care. If you have problems assembling or have damaged or missing pieces, please contact us by visiting: https://www.happybeds.co.uk/customer-service...
Page 3
Vendor: S000053 Part List Hardware List (found in box 1) Part Description Part Description B203 : 50mm Headend Black Round Stopper Footend M6 x 16mm JCBC Screw Side Support (with sticker) M6 x 40mm Side Support JCBC Screw Base Leg M6 Nut Mid Support Single Slat Cap...
Page 4
Vendor: S000053 Step 3 : Place the mid support (6) at the center and screw together with the base leg (5) using hardware parts (C) and (D). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Allen Key Step 4 : Insert hardware part (A) to the bed legs.
floor as this will cause damage to the joints and could result in failure to the product that will invalidate the warranty. For more information on cleaning and product care visit: https://www.happybeds.co.uk/help-and-advice Notes We’ve tried to make this product as easy to assemble as possible. In the unlikely event that...