Restoring Factory Default Settings - Dell SonicWALL GX250 Manual

2. Click Browse to locate a settings file which was saved using Export.
3. Once the file is selected, click Import.
4. Restart the SonicWALL for the settings to take effect.
Note: The Web browser used to Import Settings must support HTTP uploads.
Netscape Navigator 3.0 and above is recommended. Netscape Navigator may be
downloaded at <http://www.netscape.com>
.

Restoring Factory Default Settings

You can erase the SonicWALL configuration settings and restore the SonicWALL to its
factory default state.
1. Click Restore on the Preferences tab to restore factory default
settings.
2. Click Yes, and then restart the SonicWALL for the change to take effect.
Note: The SonicWALL LAN IP Address, LAN Subnet Mask, and the Administrator
Password is not reset.
Updating Firmware
The SonicWALL has flash memory and may be easily upgraded with new firmware.
Current firmware may be downloaded from SonicWALL, Inc. Web site directly into the
SonicWALL.
Note: Firmware updates are only available to registered users. You may register your
SonicWALL online at <http://www.mysonicwall.com>
.
SonicWALL Internet Security Appliance Guide Page 71