Dhcp Status - Dell SonicWALL GX250 Manual

Deleting Dynamic Ranges and Static Entries
1. To remove a range of addresses from the dynamic pool, select it from
the list of dynamic ranges, and click Delete Range. When the range has
been deleted, a message confirming the update is displayed at the bot-
tom of the browser window.
2. To remove a static address, select it from the list of static entries and click Delete
Static. When the static entry has been deleted, a message confirming the update
is displayed at the bottom of the browser window.

DHCP Status

Click the Status tab at the top of the browser window.
The scrolling window shows the details on the current bindings: IP and MAC address
of the bindings, along with the type of binding (Dynamic, Dynamic BootP, or Static
BootP).
To delete a binding, which frees the IP address in the DHCP server, select the binding
from the list, and then click Delete Binding. The operation takes a few seconds to
complete. Once completed, a message confirming the update is displayed at the
bottom of the Web browser window.
Click Refresh to reload the list of bindings. This may be necessary because Web pages
are not automatically refreshed, and new bindings may have been issued since the
page was first loaded.
SonicWALL Internet Security Appliance Guide Page 111