Table of Contents
Advertisement
Log Settings
Click Log on the left side of the browser window, and then click the Log Settings tab
at the top of the window.
Configure the following settings:
1. Mail Server - To E-mail log or alert messages, enter the name or IP ad-
dress of your mail server in the Mail Server field. If this field is left blank,
log and alert messages are not be E-mailed.
2. Send Log To - Enter your full E-mail address(username@mydomain.com)in the
Send log to field to receive the event log via E-mail. Once sent, the log is cleared
from the SonicWALL's memory. If this field is left blank, the log is not E-mailed.
3. Send Alerts To - Enter your full E-mail address (username@mydomain.com) in
the Send alerts to field to be immediately E-mailed when attacks or system errors
occur. Enter a standard E-mail address or an E-mail paging service. If this field is
left blank, alert messages are not E-mailed.
4. Firewall Name - The Firewall Name appears in the subject of E-mails sent by the
SonicWALL. The Firewall Name is helpful if you are managing multiple SonicWALLs
because it specifies the individual SonicWALL sending a log or an alert E-mail. By
default, the Firewall Name is set to the SonicWALL serial number.
Page 52 LOGGING AND ALERTING
Advertisement
Table of Contents
