Advertisement
Give all pieces (except Power Base) a quick rinse
Getting started couldn't be easier! Get your NUTRIBULLET unit out and give
the cups and blades a quick rinse with warm soapy water. Then get ready to
create your first NUTRIBLAST!
Now it's time make your first
NUTRIBLAST!
14
with soapy water before using!
GETTING STARTED
STEP 1:
ADD 50% LEAFY GREENS TO THE NUTRIBULLET CUP.
Two cups makes up a full serving of leafy greens, so that's the amount
you want to work up to in the first few weeks. That's about two good-
sized handfuls.
STEP 2:
ADD 50% FRUIT TO THE NUTRIBULLET CUP.
A serving of fruit is generally a cup. We suggest adding a
banana or 1/2 of an avocado to every Blast for the "creamy"
factor. Then add three more fruits (or more if you can fit it!) to
your NUTRIBULLET Cup.
STEP 3:
ADD LIQUID. To make a NUTRIBLAST, you must add
liquid. We suggest you use a liquid of your choice (such as water,
coconut water or almond milk) up to but never beyond the MAX
LINE. For a thicker Blast, use a little bit less liquid.
STEP 4:
ADD YOUR BOOST (optional).
Add a handful of nuts, seeds or goji berries to pack in
some essential fatty acids! Boosts make for a more
nutritious and filling NUTRIBLAST.
STEP 5:
TWIST ON THE
NUTRIBULLET BLADE, EXTRACT, ENJOY! Twist on the blade,
then place the cup on the Power Base. Push down and twist
until it locks into the "on" position (you'll know because it will
be running!). Keep extracting until you achieve a very smooth
consistency. Twist on the handle and bottoms up!
STEP 6:
TO TURN OFF THE NUTRIBULLET, simply twist in the opposite
direction (to the right) to release the tabs and stop pressing down on the cup.
Once the power base stops completely, remove the cup from the power base.
15
Advertisement
